PhysicsLab is a planned simulation environment spanning
mechanics, optics, electromagnetism, waves, fluids and
thermodynamics. Experiments would expose physical parameters,
time controls and visual graphs so users can inspect changes
over time. An astronomy module is also planned for
celestial-body motion, gravitational interactions and orbital
behaviour.
Planned mechanics, force and motion experiments. This
capability is documented in the project material; the detail
page distinguishes its intended user experience from the
supporting implementation and any configuration needed to run
it.
02
Planned optics, waves, electromagnetism and circuits
Planned optics, waves, electromagnetism and circuits. This
capability is documented in the project material; the detail
page distinguishes its intended user experience from the
supporting implementation and any configuration needed to run
it.
03
Planned thermal, fluid and material simulations.
Planned thermal, fluid and material simulations. This
capability is documented in the project material; the detail
page distinguishes its intended user experience from the
supporting implementation and any configuration needed to run
it.
04
Planned celestial-body, gravity and orbital simulati
Planned celestial-body, gravity and orbital simulations. This
capability is documented in the project material; the detail
page distinguishes its intended user experience from the
supporting implementation and any configuration needed to run
it.
02 · Technical structure
How the system works
Planned component boundaries and data flow.
01
The README describes a proposed modular architecture. No
executable implementation is verified in the repository.
01 · Input or user action
The workflow starts with the corresponding user choice or data
entry. Planned mechanics, force and motion experiments. This
capability is documented in the project material; the detail
page distinguishes its intended user experience from the
supporting implementation and any configuration needed to run
it.
02 · Application processing
The relevant component must interpret the input, apply the
project rules and coordinate any necessary storage, network
access or computation. The documentation below identifies
where that responsibility appears in the source when it is
evidenced.
03 · Result and feedback
The resulting screen, calculation or stored record should
reflect the processed state. Planned thermal, fluid and
material simulations. This capability is documented in the
project material; the detail page distinguishes its intended
user experience from the supporting implementation and any
configuration needed to run it.
04 · Boundaries and verification
This page describes the documented behaviour, not an
independently verified live deployment. Runtime configuration,
permissions, test data or connected services may still be
required.
PROJECT WALKTHROUGH
Design & planned systems
Concept modules described in the product roadmap.
01
Motion and mechanics — planned
The design covers position, velocity, forces and collisions,
with user-controlled physical parameters and time stepping.
Celestial bodies, gravitational forces, orbit trajectories and
changing time scales form an explicit astrophysics extension
to the physics laboratory.
04
Measurement and visual analysis — planned
Graphs, units, conservation checks and scenario comparison
will be central to understanding simulations rather than
relying only on animation.
03 · Explore
Project-specific preview
Astronomy Explorer previewIllustrative 2D orbit · not an N-body solver
A visual orbit to communicate the concept. Mass, gravity,
velocity and orbital integration are not calculated here.
Visual studies · project-specific
Interface and system concepts
Independent illustrative views of the documented or proposed
workflows. They are not connected to a running backend, and
their values are not actual measurements.
Planned mechanics view · illustrative
Motion and force study
v₀ ↗
The simulation design connects position and velocity updates
to selected laws, units and integration steps.
Initial velocityMassGravityTrajectory
Planned astronomy view · illustrative
Orbital model and celestial bodies
An orbital scene should be driven by a documented gravity
model with conservation checks and explicit numerical
accuracy limits.
Central bodyOrbiting bodyInitial stateElapsed time
Planned waves panel · illustrative
Wave interference and signal view
Another planned module can compare oscillations, combined
signals or wave behaviour using labelled parameters rather
than a disconnected animation.
AmplitudeFrequencyPhaseSuperposition
04 · Source and design
Implementation examples and code walkthrough
Illustrative design-only code. This is not part of an implemented
or executable application.
model = MechanicsModel(parameters, units="SI")
state = model.initial_state()
for step in simulation_clock:
forces = model.compute_forces(state)
state = integrator.advance(state, forces, step.dt)
diagnostics.check_conservation(state)
recorder.save_frame(step.time, state)
Code samples are excerpts or documented illustrations; surrounding
project files, configuration and dependencies may be required to
compile or run them.
05 · Visual material
Interface & screenshots
Screenshots from supplied documentation and repository media.
Missing visuals remain placeholders rather than invented screens.
▧
No verified product screenshot yet
To fill this space, add an approved screenshot with the exact
filename shown below. The site currently displays a neutral
placeholder.
assets/img/projects/physicslab/screenshot-01.webp
06 · Technology
Programming languages & stack
C++
Qt 6
QML
Core technologies and integrations used or planned for this
project.
File types identified: 1 .md
07 · Reality check
Status, evidence & limitations
The project status is based on repository sources and supplied
documentation. It may be updated as the project evolves. A
published case study is not a certification of production
readiness.
Features are based on the supplied README and code inventory; no
end-to-end runtime certification is implied.
08 · Resources
Downloads & project resources
Installers appear only after a verified release is added to the
public download directory. Unavailable builds are marked clearly.